JUAL AIR-PWR INJ3 Power Injector

The Cisco Aironet Power Injector Media Converter (AIR-PWRINJ-FIB) converts fiber media to Category 5 media and combines the resulting data signal with power for delivery to the access point or bridge. The power injector media converter accepts 48 VDC power from either the barrel connector of the local power supply or an alternative 48 VDC power source. When powered by an alternate 48 VDC power source connected using the provided power supply pigtail, the Power Injector Media Converter is UL2043 certified and suitable for installation in environmental air spaces. The local power supply is provided with the Cisco Aironet 1100, 1130AG, 1200, 1230AG and 1240AG series access points. The power injectors provide up to 15 watts (depending on the Cisco power supply model) over the unused wire pairs of a Category 5 Ethernet cable, supplying enough power to provide for up to a 100-meter cable run. 

Description	Cisco Aironet Power Injector Media Converter for 1100, 1130AG, 1200, 1230AG and 1240AG Series	Cisco Aironet Power Injector for 1100, 1130AG, 1200, 1230AG and 1240AG Series
Part Number	AIR-PWRINJ-FIB	AIR-PWRINJ3
LAN Connection	• Max Fiber cable length: 2 km • Type: MT-RJ (multimode fiber) • Label: 100BASE-FX To Network • Speed: 100 Mbps • Duplex: Full	• Max Cat 5 cable length: 100 m from switch to device • Type: RJ-45 • Label: 10/100BASE-TX To Network
Device Connection	• Max Cat 5 cable length: 100 m • Type: RJ-45 • Label: 100BASE-TX To Device • Speed: 100 Mbps • Duplex: Full • Auto MDI-X	• Max Cat 5 cable length: 100 m from switch to device • Type: RJ-45 • Label: 10/100BASE-TX To Device
LEDs	• 2 - Power Status • Uplink Connectivity	• 2 - Power Status • Device Connectivity
Interlockable	Yes	Yes
Wired Pairs Used	Injects power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive)	Injects power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive)
Electrical	• Input voltage (supplied by external power supply) 48VDC ± 10%, 18 watts • Output voltage: 48 VDC	• Input voltage (supplied by external power supply) 48VDC ± 10%, 18 watts • Output voltage: 48 VDC
	• Input current: .380A • Output current: .320A	• Input current: .380A • Output current: .320A
Power Supply Requirements	Cisco Aironet power supply or alternative DC power supply,* 48 VDC ± 5%, 18 watts	Cisco Aironet power supply, 48 VDC ± 5%, 18 watts
Dimensions	5.49 x 2.14 x 1.36 in. (13.93 x 5.43 x 3.45 cm)	5.49 x 2.14 x 1.36 in. (13.93 x 5.43 x 3.45 cm)
Weight	4 oz.	4 oz.
Environmental	• 32° to 104° F (0° to 40° C) • 10-90% humidity (noncondensing) • UL 2043 certified for environmental air space installations when using supplied power supply pigtail	• 32° to 113° F (0° to 45° C) • 10-90% humidity (noncondensing)