JUAL CISCO WS-C2970G-24T-E CATALYST

The Cisco Catalyst 2970G-24TS is a member of the Cisco Catalyst 2970 Series of affordable Gigabit-to-the-desktop Ethernet switches that delivers wire-speed intelligent services. With 24 10/100/1000 BaseT and 4 SFP-based Gigabit Ethernet ports, the Catalyst 2970G-24TS is ideal for high-performance departmental workgroups and small enterprise branch offices that need to boost network performance over existing Category 5 copper cabling. Featuring a complete set of intelligent services, the Catalyst 2970 Series can increase productivity for today's knowledge workers by intelligently scaling beyond 100 Mbps.

Description	Specification
Performance	• 32 Gbps switching fabric • Forwarding bandwidth: 28 Gbps (Cisco Catalyst 2970G-24TS), 24 Gbps (Cisco Catalyst 2970G24T) • Forwarding rate based on 64-byte packets: 38.7 Mpps (Cisco Catalyst 2970G-24TS), 35.7 Mpps (Cisco Catalyst 2970G-24T) • 128 MB DRAM and 16 MB Flash memory • Configurable up to 8192 MAC addresses • Configurable up to 1000 IGMP groups and bridging entries • Configurable maximum transmission unit (MTU) of up to 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1546 bytes for bridging on Fast Ethernet ports
Connectors and Cabling	• 10BASE-T ports: RJ-45 connectors; 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling • 100BASE-TX ports: RJ-45 connectors; 2-pair Category 5 UTP cabling • 1000BASE-T ports: RJ-45 connectors; 2-pair Category 5 UTP cabling • 1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Category 5 UTP cabling • 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single-mode or multimode fiber) • Management console port: RJ-45-to-DB9 cable for PC connections
Power Connectors	Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 675. The connectors are located at the back of the switch.
Internal Power Supply Connector	• The internal power supply is an autoranging unit. • The internal power supply supports input voltages between 100 and 240 VAC. • Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Cisco RPS 675 Connector	• Offers connection for an optional Cisco RPS 675 that uses AC input and supplies DC output to the switch. • Offers a 675W RPS that supports up to 6 external network devices and provides power to 1 failed device at a time. • Automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic. • Only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) should be attached to the RPS receptacle.
Indicators	• Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications • System-status LEDs: system, RPS, and bandwidth-utilization indications
Dimensions (H x W x D)	• 2.59 x 17.5 x 11.6 in. (6.59 x 44.5 x 29.5 cm) (Cisco Catalyst 2970G-24TS) • 1.73 x 17.5 x 12.83 in. (4.39 x 44.5 x 32.6 cm) (Cisco Catalyst 2970G-24T)
Weight	• 12.5 lb (5.68 kg) (Cisco Catalyst 2970G-24TS) • 10 lb (4.55 kg) (Cisco Catalyst 2970G-24T)
Environmental Ranges	• Operating temperature: 32 to 113ºF (0 to 45ºC) • Storage temperature: -13 to 158ºF (-25 to 70ºC) • Operating relative humidity: 10 to 85 percent (noncondensing) • Operating altitude: Up to 10,000 ft (3049 m) • Storage altitude: Up to 15,000 ft (4573 m)
Acoustic Noise	• International Organization for Standardization (ISO) 7779: Bystander position operating to an ambient temperature of 30ºC • Cisco Catalyst 2970G-24TS: 42 dB • Cisco Catalyst 2970G-24T: 42 dB
Predicted Mean Time Between Failure (MTBF)	• 163,222 hrs (Cisco Catalyst 2970G-24TS) • 219,108 hrs (Cisco Catalyst 2970G-24T)